Para acceder a los documentos con el texto completo, por favor, siga el siguiente enlace: http://hdl.handle.net/10459.1/47813
|
Título:
|
Life Cycle Assessment of experimental cubicles including PCM manufactured from natural resources (esters): a theoretical study
|
|
Autor/a:
|
Menoufi, Karim Ali Ibrahim; Castell, Albert; Farid, Mohammed M.; Boer, Dieter; Cabeza, Luisa F.
|
|
Notas:
|
Among the research activities that aim at reducing energy consumption in buildings and their impact on
the environment is an experimental set-up that has several house-shaped cubicles constructed in
Puigverd de Lleida (Spain). Assessing the environmental impact through studying the manufacturing,
operational and disposal phases of these cubicles have been done in previous research. The objective of
this paper is to investigate the use of esters as PCM in order to estimate its environmental impact in
building envelopes in comparison to the use of paraffin or salt hydrates through a theoretical study. The
evaluation of the environmental impact of this type of PCM material is conducted using Life Cycle
Assessment (LCA) based on the Eco-indicator 99 method. It is found that the impact of ester used as PCM
presents slightly better results than the case of using salt hydrates during the manufacturing impact. On
the other hand, the use of salt hydrates or ester as PCM in the cubicles results in an impact reduction of
9% and 10.5% respectively, compared to the case of using paraffin.
The work was partially funded by the Spanish government (projects ENE2008-06687-C02-01/CON and DPI2008-04099/DPI) and the European Union (COST Action COST TU0802 and project EFFIBUILDINGS – FP7-PEOPLE-2009-IIF −/− 253914) |
|
Materia(s):
|
-LCA
-PCM
-Ester |
|
Derechos:
|
(c) Elsevier, 2012
info:eu-repo/semantics/restrictedAccess |
|
Tipo de documento:
|
article
publishedVersion |
|
Editor:
|
Elsevier
|
|
Compartir:
|
|
Documentos con el texto completo de este documento
Mostrar el registro completo del ítem
