Título:
|
Method for controlling mean droplet size in the manufacture of phase inversion bituminous emulsions
|
Autor/a:
|
Querol Solà, Núria; Barreneche Güerisoli, Camila; Cabeza, Luisa F.
|
Notas:
|
The most important factors related to the manufacture of phase inversion bitumen in water emulsions are discussed in this paper. The distribution and average droplet diameter of an emulsion depends on formulation variables such as the volume fraction, the concentration and type of surfactant and the temperature of the dispersed phase employed, the type of bitumen used, and mechanical variables as the rotational speed and time used. The emulsions for this study are prepared according to the High Internal Phase Ratio (HIPR) procedure, which requires that the initial dispersion is conducted with internal phase fractions higher than the critical packing (φ > 0.74). The bitumen used in this paper are 15/25, 35/50, 50/70 and 70/100. This procedure allows the manufacture of high concentration emulsions, with a small average droplet size, and narrow particle size distribution. Results show that both the droplet size and the particle size distribution obtained can be controlled by changing the parameters of the formulation. Specially one of the most important parameters to consider in the emulsion formulation if we want to obtain the smallest mean droplet size is the penetration grade bitumen used, such as the results presented in this paper.
The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREA (2014 SGR 123). Dr. Camila Barreneche would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-22886. And Núria Querol would like to thank Sorigue Company for giving her the opportunity
to develop this study using its manufacture production plant equipped with the most advanced technology to develop this kind of emulsions. |
Materia(s):
|
-Highly concentrated emulsions -HIPR procedure -Mean droplet diameter -Storage stability -Hard penetration bitumen grade -Emulsions -Engineering |
Derechos:
|
cc-by-nc-nd (c) Elsevier, 2017
https://creativecommons.org/licenses/by-nc-nd/4.0/
|
Tipo de documento:
|
Artículo acceptedVersion |
Editor:
|
Elsevier
|
Compartir:
|
|