|
Abstract:
|
The study of hot band microstructure and texture during the hot rolling process is of
great importance within the general context of texture development during
thermomechanical material processing. In this thesis work, the microstructure and
texture after hot rolling of several low carbon steel grades (LC, ELC, ULC, B-ULC
and IF) are of interest. Hot band characterization is meant to be made on the basis of
the influence of parameters such as finishing rolling temperature (FRT), strain at the
last pass, and chemical composition. Regarding the microstructural characterization,
the grain size characterization is addressed. Optical microscopy (OM) together with
the AnalySIS auto image post-processing software are used. In the second part of the
work, texture development for the ELC and ULC steels is further investigated by
means of XRD.
A correlation between the chemistry and the hot band grain size is established based
for the several grades of interest. However, the effect of parameters such as FRT,
strain at the last pass could not be clearly determined. The behaviour of the austenite
can be traced back by the resulting transformation textures after cooling.
The measured textures for the ELC and ULC materials could not make it possible to
determine the behaviour of the austenite during the hot deformation. The effect of the
reduction in the last rolling pass is also investigated. |
