To access the full text documents, please follow this link: http://hdl.handle.net/2117/16486
Title: | Nanoindentation of Bridgman YBCO samples |
---|---|
Author: | Roa Rovira, Joan Josep; Konstantopoulou, Dimitra; Jiménez Piqué, Emilio; Martín, V.; Segarra, M.; Pastor, J.Y. |
Other authors: | Universitat Politècnica de Catalunya. Departament de Ciència dels Materials i Enginyeria Metal·lúrgica; Universitat Politècnica de Catalunya. CIEFMA - Centre d'Integritat Estructural, Micromecànica i Fiabilitat dels Materials |
Abstract: | n this study, the mechanical properties of YBa2Cu3O7−x, obtained by the Bridgman technique, were examined using a Berkovich tip indenter on the basal plane (0 0 1). Intrinsic hardness was measured by nanoindentation tests and corrected using the Nix and Gao model for this material. Furthermore, Vickers hardness tests were performed, in order to determine the possible size effect on these measurements. The results showed an underestimation of the hardness value when the tests were performed with large loads. Moreover, the elastic modulus of the Bridgman samples was 128 ± 5 GPa. Different residual imprints were visualised by atomic force microscopy and a focused ion beam, in order to observe superficial and internal fracturing. Mechanical properties presented a considerable reduction at the interface. This effect could be attributed to internal stress generated during the texturing process. In order to corroborate this hypothesis, an observation using transmission electron microscopy was performed. |
Abstract: | Peer Reviewed |
Subject(s): | -Àrees temàtiques de la UPC::Enginyeria dels materials -Bridgman -Nanoindentation -Superconductor material -YBaCuO -Materials ceràmics -Nanotecnologia -Superconductors d'alta temperatura |
Rights: | Attribution-NonCommercial-NoDerivs 3.0 Spain
http://creativecommons.org/licenses/by-nc-nd/3.0/es/ |
Document type: | Article - Published version Article |
Share: |