Título:
|
An IBC solar cell for the UPC CubeSat-1 mission
|
Autor/a:
|
Ortega Villasclaras, Pablo Rafael; Jové Casulleras, Roger; Pedret, A; Gonzalvez, G.; López Rodríguez, Gema; Martín García, Isidro; Domínguez Pumar, Manuel; Alcubilla González, Ramón; Camps Carmona, Adriano José
|
Otros autores:
|
Universitat Politècnica de Catalunya. Departament d'Enginyeria Electrònica; Universitat Politècnica de Catalunya. Departament de Teoria del Senyal i Comunicacions; Universitat Politècnica de Catalunya. MNT - Grup de Recerca en Micro i Nanotecnologies; Universitat Politècnica de Catalunya. RSLAB - Grup de Recerca en Teledetecció |
Abstract:
|
In this work the fabrication and electrical characterization of interdigitated back contact IBC solar cells is shown. These solar cells have been specifically designed for a CubeSat based satellite under developement at the Universitat Politecnica de Catalunya (UPC). Solar cells incorporate a transparent cover-glass as an extraterrestrial radiation shield. Front surface passivation was achieved using an Al2O3 layer exhibiting surface recombination velocities <; 100 cmls at the final device. Measurements confirm photovoltaic efficiencies η's-12%, with open circuit voltages Voc's ~650 m V and short circuit current densities Jsc's ~25 mA/cm2. A module with 11 IBC solar cells interconnected in series will be integrated in one of the faces of the satellite forming part of the power subsystem. Preliminary results confirm the good electrical performance of the module. |
Abstract:
|
Peer Reviewed |
Materia(s):
|
-Àrees temàtiques de la UPC::Enginyeria de la telecomunicació::Radiocomunicació i exploració electromagnètica::Satèl·lits i ràdioenllaços -Artificial satellites in telecommunication -Solar cells -Electron devices -Open circuit voltage -Silicon -Satèl·lits artificials en telecomunicació |
Derechos:
|
|
Tipo de documento:
|
Artículo - Versión publicada Objeto de conferencia |
Editor:
|
Institute of Electrical and Electronics Engineers (IEEE)
|
Compartir:
|
|