Título:
|
Comparativa estructural de quadres de bicicleta mitjançant el Mètode dels Elements Finits
|
Autor/a:
|
Baldominos Batlle, Ignasi
|
Otros autores:
|
Universitat Politècnica de Catalunya. Departament de Resistència de Materials i Estructures a l'Enginyeria; Zárate Araiza, José Francisco |
Abstract:
|
En el món del ciclisme, a part de la forma física del ciclista, és molt important
les prestacions de la bicicleta. Aquestes poden venir de les diferents parts de
la bicicleta
.
En concret, una de les parts mé
s importants és el quadre. Les
principals marques de bicicletes estan constantment innovant per tal de
millorar aquest element, ja
sigui en les formes o en els materials.
Aquest estudi
sorgeix de la curiositat d’un aficionat i practicant del ciclisme, i
d
e veure com afecten les forces aplicades a un quadre estàndard de bicicleta
de muntanya.
El principal objectiu és realitzar un assaig mitjançant el mètode de càlcul
d’elements finits. Concretament es pretén observar les reaccions del quadre
com la deforma
ció i la seva resistència,
al ser sotmès a una força. Aquest
estudi es realitzarà amb l’ajuda de dos programes de dibuix i de càlcul
importants en el món de l’enginyeria, el Solid Edge i el GiD.
Per realitzar l’estudi més real, es simularà un assaig empr
at per la normativa
UNE
-
EN 14766 que fa referència a les bicicletes de muntanya. S’ha triat
aquest assaig perquè és realment el que s’utilitza a l’hora d’estudiar el
comportament d’un quadre.
El treball està dividit en tres blocs. El primer bloc té com a
finalitat explicar les
nocions bàsiques per entendre bé l’estudi. En el segon bloc, es realitza l’estudi
del quadre de la bicicleta i al tercer bloc es mostren i discuteixen els resultats
obtinguts.
Com a conclusions de l’estudi, es pot extreure que la re
sistència del quadre
depèn de la geometria i del material amb el qual està fabricat. També s’ha
trobat una de les moltes solucions per optimitzar la resistència del quadre
tenint en compte el seu pes. |
Abstract:
|
Anglès: In the world of cycling, the rider's fitness is very important but the benefit of the bicycle is also important. These benefits may come from different parts of the bike. In particular, one of the most important parts is the bike frame. The main manufacturers of bikes are constantly innovating to improve this element either forms or materials. This study comes from the curiosity of fan and practicing, and sees how they affect the forces applied to a standard mountain bike frame. The main objective is to perform a test using the calculation finite elements method. Specifically it aims to observe the reactions of the bike frame as strain and its resistance to being subjected to a force. This study was carried out with the help of two drawing programs and calculation important in the world of engineering, Solid Edge and GiD. To make the study more realistic, is a test used to simulate the UNE-EN 14766 refers to mountain bikes. This test was chosen because it is really what it is used to study the behaviour of a bike frame. The study is divided into three parts. The first part aims to explain the basics knowledge to understand the study. In the second section, studying the bike frame and the third section is a discussion of the results. As a conclusion of the study, we can see that resistance depends on the geometry and the material of which it is made. We also found one of the many solutions to optimize the strength of the box considering its weight. |
Materia(s):
|
-Àrees temàtiques de la UPC::Física -Àrees temàtiques de la UPC::Matemàtiques i estadística::Anàlisi numèrica::Mètodes en elements finits -Finite fields (Algebra) -Mountain bikes -Análisis Estructural -MEF -Simulación -Modelación Numérica -Elements finits, Mètode dels -- Anàlisi numèrica |
Derechos:
|
Attribution-NonCommercial-ShareAlike 3.0 Spain
http://creativecommons.org/licenses/by-nc-sa/3.0/es/ |
Tipo de documento:
|
Trabajo/Proyecto fin de carrera |
Editor:
|
Universitat Politècnica de Catalunya
|
Compartir:
|
|