Title:
|
Control convertidor dc-ac de 100kW
|
Author:
|
Olives Camps, Juan Carlos
|
Other authors:
|
Universitat Politècnica de Catalunya. Departament d'Enginyeria Elèctrica; Rocabert Delgado, Joan |
Abstract:
|
[Castellà]: Este proyecto desarrolla un estudio y diseño de un inversor trifásico que trabaja como fuente de corriente conectado a red. Tanto a nivel de hardware (los elementos físicos necesarios para su funcionamiento) como el desarrollo del software de control.
A nivel de hardware se explicará la función de los componentes y estudiará la necesidad
y las variables que determinan su dimensionado. Al mismo tiempo, el uso de
convertidores de potencia conectados a red requiere la implementación de un adecuado
sistema de filtrado. Es por este motivo que en este proyecto se dedicarán unas líneas al
diseño de este.
A nivel de software se pretende desarrollar una evolución, en cuanto a complejidad, del
sistema de control así como las etapas necesarias para el desempeño de su función. Se presentarán los resultados obtenidos mediante la simulación de los circuitos y los
resultados experimentales del testeo de un inversor real.
Las etapas de control y software se realizarán para un inversor de 100kW, mientras que el dimensionado de los elementos de hardware se llevará a cabo para uno de 50kW.
Finalmente, los ensayos realizados sobre el inversor serán realizados controlando un
convertidor de 10kW. |
Abstract:
|
[English]: This project develops the study and design of a three-phase inverter connected to the grid working as a current source. Both hardware level (the physical elements necessary for its operation) as the development of the control software.
About the hardware level, the role of the components and the need for their existence
will be explained as the variables that determine its sizing. The use of power converters connected to the grid requires the implementation of a suitable filtering system. For this reason, a few lines of this project will try to explain the filter design.
The study about de software level will try to develop an evolution, in terms of
complexity, of the control system as well as the steps needed to carry out its work. The
results obtained by simulating the circuits and experimental results of testing will be
presented and compared.
Control stages and software will be performed for a 100kW inverter; however, the
sizing of the hardware elements will be calculated for one of 50kW. Finally, testing of the inverter will be carried out by controlling a 10kW converter. |
Subject(s):
|
-Àrees temàtiques de la UPC::Energies::Energia elèctrica -Àrees temàtiques de la UPC::Enginyeria electrònica::Electrònica de potència -Electric current converters--Design -Electric inverters -Electrònica de potència -Inversors -Dc-ac -Convertidors de corrent elèctric -Convertidors continu-altern |
Rights:
|
http://creativecommons.org/licenses/by-nc-nd/3.0/es/ |
Document type:
|
Bachelor Thesis |
Published by:
|
Universitat Politècnica de Catalunya
|
Share:
|
|