To access the full text documents, please follow this link: http://hdl.handle.net/2117/100660

Title:	High cycle fatigue of ARMCO iron severely deformed by ECAP
Author:	Muñoz Bolaños, Jairo Alberto; Higuera Cobos, Oscar Fabián; Cabrera Marrero, José M.
Other authors:	Universitat Politècnica de Catalunya. Departament de Ciència dels Materials i Enginyeria Metal·lúrgica; Universitat Politècnica de Catalunya. PROCOMAME - Processos de Conformació de Materials Metàl·lics
Abstract:	The high-cycle fatigue behavior of ARMCO iron severely deformed by Equal Channel Angular Pressing (ECAP) at room temperature through route Bc until 8 passes, with an average grain size of ~365 nm, was studied and compared with the same material in the annealed state with an average grain size of ~72 µm. The fatigue limit of the 8 passes ECAPed sample increased with respect to the annealed material by more than 250% rising from 274 MPa to 717 MPa. Striations and dimpled relief were observed on the fracture surfaces of the fatigued ultrafine and coarse grain fatigue samples. The microstructure was characterized by Electron Backscattered Diffraction (EBSD) before and after the fatigue tests and it was observed in both samples an increment in the fraction of Low Angle Grain Boundaries (LAGB) at high number of cycles to failure. A texture analysis for the materials after the fatigue failure was done. This study shown a preferential orientation towards the ¿ fiber for both conditions.
Abstract:	Peer Reviewed
Subject(s):	-Àrees temàtiques de la UPC::Enginyeria dels materials -Iron -High-Cycle Fatigue (HCF) -S-N curve -Fatigue limit -Inverse Polo Figure (IPF) -Orientation Distribution Function (ODF) -Acer -Acer d'alta resistència
Rights:	http://creativecommons.org/licenses/by-nc-nd/3.0/es/
Document type:	Article - Submitted version Article
Share:

Show full item record