dc.contributor |
Universitat Politècnica de Catalunya. Departament d'Expressió Gràfica a l'Enginyeria |
dc.contributor.author |
Nogués Mañé, Carlos |
dc.date |
2006 |
dc.identifier.citation |
Nogues, C. Sinopsis y notas de trabajo sobre AutoCAD: inventario y propuestas. A: Congreso Internacional de Ingeniería Gráfica. "XVIII Congreso Internacional de Ingeniería Gráfica : diseño e innovación : actas del congreso: Sitges 31 de Mayo, 1 y 2 de Junio de 2006". Sitges, Barcelona: 2006, p. 1-16. |
dc.identifier.citation |
84-689-8593-7 |
dc.identifier.uri |
http://hdl.handle.net/2117/19325 |
dc.language.iso |
spa |
dc.relation |
http://www.ingegraf.es/XVIII/PDF/Comunicacion17044.pdf |
dc.rights |
Attribution-NonCommercial-NoDerivs 3.0 Spain |
dc.rights |
info:eu-repo/semantics/openAccess |
dc.rights |
http://creativecommons.org/licenses/by-nc-nd/3.0/es/ |
dc.subject |
Àrees temàtiques de la UPC::Recursos generals::Programes d'ordinador |
dc.subject |
Computer-aided design |
dc.subject |
AutoCAD |
dc.subject |
Disseny assistit per ordinador |
dc.subject |
AutoCAD (Programes d'ordinador) |
dc.title |
Sinopsis y notas de trabajo sobre AutoCAD: inventario y propuestas |
dc.type |
info:eu-repo/semantics/submittedVersion |
dc.type |
info:eu-repo/semantics/conferenceObject |
dc.description.abstract |
En los últimos años de docencia he venido redactando cortas monografías para poner en orden mis
propias ideas y fijar conclusiones sobre el funcionamiento de AutoCAD en sus distintas versiones,
porque los manuales suelen pasar de puntillas sobre las cuestiones espinosas. También los recorridos
transversales, sobre los diferentes temas que afectan a una cuestión o su evolución a lo largo de
sucesivas versiones, son recomendables para contrarrestar la excesiva parcelación de las exposiciones
sistemáticas. De todo este material, sólo una parte
ha sido incluida en los apuntes de clase porque el
resto es más bien letra pequeña sólo apta para especialistas, si bien podría ser útil su difusión aunque
sólo fuera para evitar a sus potenciales lectores quemar muchas horas frente al ordenador: dado el
mutismo o poca claridad de los manuales, la vía
empírica es el único medio para alcanzar certezas.
Como supongo que numerosos profesionales y docentes, con AutoCAD como herramienta habitual u
objeto de estudio, deben compartir tales inquietudes y
hábitos, presento un inventario de las 30 fichas
realizadas hasta ahora, a disposición de cuantos acepten la filosofía del "quid pro quo". Incluyo la
invitación a colaborar, por puro placer, en el diseño
de un simulador de reactivo posicional de cursor.
ABSTRACT During the past few years, in view of the tendency
of manuals to pass quickly over difficult issues, I
have written several short articles on the different versions of AutoCAD. Also, the excessive divisions
used in most systematic presentations mean that a lateral overview, looking at the different themes that
affect an issue or its evolution
through successive versions, is advisab
le and a welcome contrast. From
all this material, only a small amount has been included in the class notes since the rest is really the
small print which is only of interest to the expert. However, it could well be useful to publish it, if only
to ensure that potential readers do not waste many
hours glued to their compared screens: in view of
the lack of clarity in the manuals, experience is the
only way to arrive at certain results. As I suppose
that many professionals and educators (who use AutoCAD as an everyday tool, or who study it) must
share my concerns and methods, I am providing a list of the 30 files I have written so far. They are
available to all those who accept the philosophy of "quid pro quo". I would also like to invite anyone
who is interested in collaborating, for the pure pleasure of it, in the design of a cursor position reactor
simulator. |