dc.contributor |
Universitat Politècnica de Catalunya. Departament d'Enginyeria de la Construcció |
dc.contributor |
Università degli Studi di Padova |
dc.contributor |
Pelà, Luca |
dc.contributor |
Pialarissi Cavalaro, Sergio Henrique |
dc.contributor.author |
Rodríguez Jimeno, Sara |
dc.date |
2017-07-14 |
dc.identifier.citation |
PRISMA-129639 |
dc.identifier.uri |
http://hdl.handle.net/2117/113969 |
dc.language.iso |
eng |
dc.publisher |
Universitat Politècnica de Catalunya |
dc.rights |
Attribution 3.0 Spain |
dc.rights |
info:eu-repo/semantics/openAccess |
dc.rights |
http://creativecommons.org/licenses/by/3.0/es/ |
dc.subject |
Àrees temàtiques de la UPC::Enginyeria civil |
dc.subject |
Numerical analysis |
dc.subject |
Architecture and climate |
dc.subject |
Arches |
dc.subject |
Anàlisi numèrica |
dc.subject |
Arquitectura i clima |
dc.subject |
Arcs (Arquitectura) |
dc.title |
Numerical simulation strategies for superadobe walls and arches |
dc.type |
info:eu-repo/semantics/masterThesis |
dc.description.abstract |
The superadobe is a construction technique that consists on building using bags filled with soil
and adding barbwire between the courses. It is a simple, durable, sustainable, and affordable
technique that has increased in popularity over the last years. Moreover, a remarkable effort was
performed in the past years in order to analyse the structural behaviour and characterize the
mechanical properties of these constructions. However, since it is a relatively recent technique,
no previous studies of complete structures have been performed using numerical strategies and
there is still a lack of knowledge regarding its structural response.
Consequently, the present thesis attempts to analyse these type of structures using the finite
element method, assessing its suitability and applicability to the superadobe. For this purpose,
several models of both walls and arches are studied, subjected to different load dispositions and
considering three construction types, plain, adding barbwire and stabilizing the infill.
Initially two possible constitutive models are considered, Mohr Coulomb and Total strain crack
based, and they are evaluated and compared in order to select the most suitable for all the cases
studied. Afterwards, all the analyses are performed and calibrated to match the results obtained
from the experimental campaigns developed in the University of Bath by Pelly (2009), Vagdama
(2010) and Croft (2011). Finally, a sensitivity analysis is also carried out to examine the influence
of certain parameters, which had to be adjusted during the analyses, into the structural response
of the models. |
dc.description.abstract |
El superadobe es una solución constructiva que consiste en la utilización de bolsas rellenas de
tierra apisonadas a las que se les añade alambre de espino entre ellas para aportar cohesión y
Resistencia a tracción al conjunto. Es una técnica simple, duradera, sostenible y asequible cuya
popularidad ha ido creciendo durante los últimos años. Además, recientemente se ha realizado
un notable esfuerzo con el fin de analizar el comportamiento estructural y determinar las
propiedades mecánicas del superadobe. No obstante, al tratarse de una técnica relativamente
nueva, no se han desarrollado aún estudios de estructuras completas utilizando estrategias
numéricas, y existe todavía una carencia de información en lo que respecta a la respuesta
estructural de estas construcciones.
Por consiguiente, la presente tesis tiene como objetivo el análisis de estas estructuras utilizando
el método de los elementos finitos, evaluando su compatibilidad y aplicabilidad al superadobe.
Con este fin, se estudian varios modelos, tanto de muros como de arcos, sujetos a diferentes
disposiciones de carga y considerando tres tipos de construcción, simple, añadiendo alambre de
espino y estabilizando el relleno de las bolsas.
Inicialmente se consideran dos posibles modelos constitutivos, Mohr Coulomb y Total strain crack
based, se evalúan y comparan a fin de seleccionar el que más se adecúa a todos los casos
estudiados. Posteriormente, se llevarán a cabo y calibrarán todos los análisis para hacer coincidir
los resultados con los obtenidos en las campañas experimentales desarrolladas en la
Universidad de Bath por Pelly (2009), Vagdama (2010) y Croft (2011). Finalmente, también se
realizará un estudio de sensibilidad para examinar la influencia de ciertos parámetros, que han
debido ser ajustados durante los análisis, en la respuesta estructural de los modelos. |