Título:
|
Determination of Pd(II) using an antimony film coated on a screen-printed electrode by adsorptive stripping voltammetry
|
Autor/a:
|
Pérez-Ràfols, Clara; Trechera, Pedro; Serrano i Plana, Núria; Díaz Cruz, José Manuel; Ariño Blasco, Cristina; Esteban i Cortada, Miquel
|
Otros autores:
|
Universitat de Barcelona |
Abstract:
|
The use of an antimony film coated on a screen-printed carbon electrode (ex-situ SbSPCE) is proposed for the determination of Pd(II) at ppb levels in natural samples by adsorptive stripping voltammetry using dimethylglyoxime as chelating agent. Ex-situ SbSPCE produces a better analytical performance as compared to a commercially sputtered bismuth screen-printed electrode (BispSPE). The detection and quantification limits were 2.7 and 9.0 µg L-1 respectively with a good linear behaviour in the wide examined concentration range (from 1 µg L-1 up to 100.0 µg L1, R2= 0.998). The proposed ex-situ SbSPCE showed an excellent repeatability with a relative standard deviation of 0.5 % for ten successive measurements and a very good reproducibility (1.6 % for three different ex-situ SbSPCE units within series of ten repetitive assays). Moreover, the ex-situ SbSPCE was successfully applied for the determination of low concentration levels of Pd(II) in spiked tap water with a very high reproducibility (0.2 %) and providing equivalent results to those achieved by ICP-MS measurements |
Materia(s):
|
-Pal·ladi (Element químic) -Voltametria -Palladium -Voltammetry |
Derechos:
|
cc-by-nc-nd (c) Elsevier B.V., 2017
http://creativecommons.org/licenses/by-nc-nd/3.0/es |
Tipo de documento:
|
Artículo Artículo - Versión aceptada |
Editor:
|
Elsevier B.V.
|
Compartir:
|
|