Altres ajuts: acords transformatius de la UAB

Borja Solís is grateful for the PIF PhD grant funded by Universitat Autònoma de Barcelona.

Nitrous oxide (NO) is a greenhouse gas (GHG) emitted during biological nitrogen removal from wastewater treatment plants (WWTPs). Some modelling tools have been proposed to predict NO emissions during the design and operation of WWTPs. In this study, the novel ASM2d-NO model, which accounts for the production of NO in nutrient removal WWTPs, was used to study the associated emissions from a full-scale WWTP with two independent lines. Firstly, the hydraulics of the WWTP was characterized by a residence time distribution test, showing the flow was equally divided into the two treatment lines (49.3 vs. 50.7%), that each reactor worked as an ideal continuous stirred tank reactor and the secondary settler model flux was similar to a plug-flow reactor. The ASM2d-NO model was then calibrated using experimental data obtained under dynamic conditions. A global sensitivity analysis was used to select, among 59 model parameters, five candidates that resulted to be related to nitrifying organisms. Different parameter subsets up to four parameters were evaluated, being the subset [µ, q, K, K] the best, achieving 53.3% reduction of the calibration cost function. The model fit obtained provided a reasonably description of nutrients and NO emission trends, considering the inherent operational variability suffered in full-scale WWTPs. Finally, a simulation-based study showed that, for the given WWTP and operational conditions, an unbalanced distribution of flow-rate between the two treatment lines did not result in a significant increase on NO emissions. The results obtained show that this model can be a suitable tool for predicting NO emissions in full-scale WWTPs, and can therefore be used to find operational conditions that help to minimise these emissions.