Títol:
|
Experimental and numerical study of the die filling stage in powder metallurgy
|
Autor/a:
|
Cante Terán, Juan Carlos; Oliver Olivella, Xavier; González Ferrari, Carlos; Riera Colom, María Dolores; Istúriz, Álvaro; Prado Pozuelo, José Manuel
|
Altres autors:
|
Universitat Politècnica de Catalunya. Departament d'Arquitectura de Computadors; Universitat Politècnica de Catalunya. Departament de Resistència de Materials i Estructures a l'Enginyeria; Universitat Politècnica de Catalunya. Departament de Ciència dels Materials i Enginyeria Metal·lúrgica; Universitat Politècnica de Catalunya. LITEM - Laboratori per a la Innovació Tecnològica d'Estructures i Materials; Universitat Politècnica de Catalunya. (MC)2 - Grup de Mecànica Computacional en Medis Continus; Universitat Politècnica de Catalunya. PROCOMAME - Processos de Conformació de Materials Metàl·lics |
Abstract:
|
The aim of this work is to show the potential of the Particle Finite Element Method (PFEM) in the simulation of the powder transfer stage, in powder metallurgy industrial processes. The most innovative aspects of the work are: a) the intensive use of the particle finite element method technology to trace the motion of a representative set of particles in the solid and b) the solution of inherent problems associated with new meshing definition and data transfer during the calculation. Comparison of experimental results and numerical simulations are used to assess the performance of the method |
Matèries:
|
-Àrees temàtiques de la UPC::Enginyeria dels materials::Metal·lúrgia -Powder metallurgy -- Mathematical models -Metal·lúrgia -- Models matemàtics |
Drets:
|
|
Tipus de document:
|
Article - Versió publicada Objecte de conferència |
Publicat per:
|
European Powder Metallurgy
|
Compartir:
|
|