Título:
|
Experimental testing of joints for seismic design of lightweight structures. Part 3: gussets, corner joints, x-braced frames
|
Autor/a:
|
Casafont Ribera, Miguel; Arnedo Pena, Alfredo; Roure Fernández, Francisco; Rodríguez Ferran, Antonio
|
Otros autores:
|
Universitat Politècnica de Catalunya. Departament d'Enginyeria de la Construcció; Universitat Politècnica de Catalunya. Departament de Resistència de Materials i Estructures a l'Enginyeria; Universitat Politècnica de Catalunya. Departament de Matemàtica Aplicada III; Universitat Politècnica de Catalunya. REMM - Recerca en Estructures i Mecànica de Materials; Universitat Politècnica de Catalunya. TE - Tecnologia d'Estructures; Universitat Politècnica de Catalunya. LACÀN - Mètodes Numèrics en Ciències Aplicades i Enginyeria |
Abstract:
|
An experimental campaign on joints of x-braced frames is presented. Tests are performed on strap-gusset joints and lower and upper corner joints. Many different phenomena and failure modes are observed in these tests. However, it is possible to see that only one failure mode can be accepted if a good seismic performance of the frame needs to be guaranteed: the net-section failure of the diagonal strap after yielding. The results of the tests also allow to establish a set of recommendations for seismic design of joints. The effectiveness of these recommendations is verified by means of two final tests on complete x-braced frames. A full explanation on the behaviour of the joints and frames tested is included, together with a description of the special test set-up developed for the experimental campaign. |
Abstract:
|
Peer Reviewed |
Materia(s):
|
-Àrees temàtiques de la UPC::Enginyeria civil::Geotècnia::Sismologia -Àrees temàtiques de la UPC::Enginyeria civil::Materials i estructures -Joints (Engineering) -Earthquake resistant design -Juntures -Construccions antisísmiques -Enginyeria d'estructures -- Sismologia |
Derechos:
|
|
Tipo de documento:
|
Artículo - Versión presentada Artículo |
Compartir:
|
|