Title:
|
Small footprint evaluation of metal coatings for additive manufacturing
|
Author:
|
Krkotic, Patrick; Aguasca Solé, Alberto; O'Callaghan Castellà, Juan Manuel
|
Other authors:
|
Universitat Politècnica de Catalunya. Departament de Teoria del Senyal i Comunicacions; Universitat Politècnica de Catalunya. RSLAB - Grup de Recerca en Teledetecció; Universitat Politècnica de Catalunya. RF&MW - Grup de Recerca de sistemes, dispositius i materials de RF i microones |
Abstract:
|
Rutile resonators have been used in the past to characterize high-temperature superconductors. In this work we describe a novel use of this type of resonator: the characterization of surface resistance in metal coatings deposited on plastic substrates at 9.1 GHz. A very small sample surface (about 1 cm 2 ) is required due to the high permittivity of rutile. We describe the use of the resonator to analyze pairs of small samples and to analyze the homogeneity of a sample set diced from a larger metallized surface. We also show a novel experimental method to determine the geometrical factors in dielectric resonators. |
Abstract:
|
Peer Reviewed |
Subject(s):
|
-Àrees temàtiques de la UPC::Física::Electromagnetisme::Ones electromagnètiques -Resonators -Metal coating -Additive manufacturing -Rutile resonator -Ressonadors |
Rights:
|
|
Document type:
|
Article - Published version Conference Object |
Published by:
|
Institute of Electrical and Electronics Engineers (IEEE)
|
Share:
|
|