Abstract:
|
Standards & Publications
All Standards and Publications
Standards Products
Symposia Papers & STPs
Manuals, Monographs, & Data Series
Technical Reports
Journals
Reading Room
Authors
Book of Standards
Reading Room
Tracker Services
Catalogs
Digital Library
Enterprise Solutions
Proficiency Testing
Training Courses
Certification
Cement & Concrete Reference Lab
Volume 8, Issue 5 (October 2019)
Special Issue Paper
Effect of Silicon on the Hot Flow Behavior of Ultra-Low Carbon Austenite
(Received 30 January 2019; accepted 25 April 2019)
Published Online: 2019
CODEN: MPCACD
Format Pages Price
PDF (1.42 MB) 15 $25 ADD TO CART
Cite this document
P. Rodríguez-Calvillo, J. Schneider, Y. Houbaert, J. Cabrera, and R. Colás, "Effect of Silicon on the Hot Flow Behavior of Ultra-Low Carbon Austenite," Materials Performance and Characterization 8, no. 5 (2019): 985-999. https://doi.org/10.1520/MPC20190026
EMAIL CITATIONEXPORT CITATIONPRINT CITATION
ASTM License Agreement
REPRINTS AND PERMISSIONS
Abstract
The influence of silicon on the high-temperature deformation behavior of ultra-low carbon austenite was studied in the range of temperature and strain rate from 1,000 to 1,100°C and 0.001 to 0.1 s-1, respectively. The flow curves of the steels exhibit the classic softening due to dynamic recrystallization. The characteristic pairs of stress-strain values (zero, critical, peak, saturation, and steady state) were determined by the analysis of the work hardening curves. These values were analyzed by applying first the classical Sellars and McTegart approach. Once the apparent stress exponents and activation energies were determined as being in the vicinity of 5 and above 270 kJ/mol, respectively, a modified hyperbolic sine equation was used. The flow curves were characterized by work hardening, dynamic recovery, and recrystallization terms at any processing conditions, showing a direct relationship with the silicon content of the steels. Finally, all the flow curves of studied steels were discussed and modeled as a function of the processing parameters and silicon content. |