dc.contributor
Universitat de Lleida. Escola Politècnica Superior
dc.contributor
Castell, Albert
dc.contributor
Cabeza, Luisa F.
dc.contributor.author
Gracia Cuesta, Alvaro de
dc.date.accessioned
2024-12-05T23:10:29Z
dc.date.available
2024-12-05T23:10:29Z
dc.date.issued
2011-10-13T08:49:14Z
dc.date.issued
2012-07-17T07:55:27Z
dc.date.issued
2011-10-13T08:49:14Z
dc.date.issued
2012-07-17T07:55:27Z
dc.date.issued
2011-10-13T08:49:14Z
dc.identifier
http://hdl.handle.net/10459.1/45829
dc.identifier.uri
http://hdl.handle.net/10459.1/45829
dc.description.abstract
The domestic hot water cylinder incorporates encapsulated pcm placed in 57 vertical pipes. The use of PCM increases the thermal energy storage capacity of the cylinder and allows the use of low cost electricity during low peak periods. After experimental validation the numerical model developed in the project will be used to optimize the distribution of the pcm inside the water tank.
dc.format
application/pdf
dc.rights
Aquest document està subjecte a una llicència d'ús de Creative Commons, amb la qual es permet copiar, distribuir i comunicar públicament l'obra sempre que se'n citin l'autor original, la universitat i l'escola i no se'n faci cap ús comercial ni obra derivada, tal com queda estipulat en la llicència d'ús (<a href="http://creativecommons.org/licenses/by-nc-nd/2.5/es/">http://creativecommons.org/licenses/by-nc-nd/2.5/es/</a>)
dc.rights
info:eu-repo/semantics/openAccess
dc.subject
Aigua calenta -- Instal·lacions
dc.subject
Calor -- Emmagatzematge
dc.subject
62 - Enginyeria. Tecnologia
dc.title
Numerical analysis of including phase change material in a domestic hot water cylinder
dc.type
info:eu-repo/semantics/bachelorThesis
