Para acceder a los documentos con el texto completo, por favor, siga el siguiente enlace: http://hdl.handle.net/2117/104062

Título:	Study of available turbulence and cavitation models to reproduce flow patterns in confined flows
Autor/a:	Coussirat Núñez, Miguel Gustavo; Moll, Flavio; Cappa, E. Franco; Fontanals García, Alfred
Otros autores:	Universitat Politècnica de Catalunya. Departament de Mecànica de Fluids; Universitat Politècnica de Catalunya. FLUIDS - Enginyeria de Fluids
Abstract:	Cavitating flow in nozzles is a complex flow which implies a highly turbulent two-phase one. An accurate simulation which improves some numerical results found in the literature was achieved by means of an extensive analysis of the capabilities of several numerical models for turbulence and cavitation. The analysis performed involves calibration/ optimization tasks based on the physics of this kind of flow. This work aims to provide a quantitative criterion for the judgment of internal flow state, because it was demonstrated that the numerical results obtained with noncalibrated models could be enhanced by means of a careful calibration and thus saving computational costs.
Materia(s):	-Àrees temàtiques de la UPC::Enginyeria mecànica::Mecànica de fluids -Fluid mechanics -CFD -Cavitation -Turbulence -Orifices -Injectors -Validation/calibration code -Mecànica de fluids
Derechos:	Attribution-NonCommercial-NoDerivs 3.0 Spain http://creativecommons.org/licenses/by-nc-nd/3.0/es/
Tipo de documento:	Artículo - Versión publicada Artículo
Compartir:

Mostrar el registro completo del ítem