Para acceder a los documentos con el texto completo, por favor, siga el siguiente enlace: http://hdl.handle.net/2117/174924
dc.contributor | Universitat Politècnica de Catalunya. Doctorat en Ciència i Enginyeria dels Materials |
---|---|
dc.contributor | Universitat Politècnica de Catalunya. Departament de Ciència i Enginyeria de Materials |
dc.contributor | Universitat Politècnica de Catalunya. PROCOMAME - Processos de Conformació de Materials Metàl·lics |
dc.contributor.author | García Aguirre, Karen Adriana |
dc.contributor.author | Felguera Jiménez, Juan Luis |
dc.contributor.author | Herranz Sánchez-Cosgalla, G. |
dc.contributor.author | Calvo Muñoz, Jessica |
dc.contributor.author | Benito Páramo, José Antonio |
dc.contributor.author | Cabrera Marrero, José M. |
dc.date | 2019-05-01 |
dc.identifier.citation | Garcia, K. [et al.]. Metal injection moulding (MIM) as an alternative fabrication process for production of TWIP steel. "Powder metallurgy", 1 Maig 2019, vol. 62, núm. 3, p. 205-211. |
dc.identifier.citation | 0032-5899 |
dc.identifier.uri | http://hdl.handle.net/2117/174924 |
dc.language.iso | eng |
dc.relation | https://www.tandfonline.com/doi/abs/10.1080/00325899.2019.1618567 |
dc.rights | Attribution-NonCommercial-NoDerivs 3.0 Spain |
dc.rights | info:eu-repo/semantics/openAccess |
dc.rights | http://creativecommons.org/licenses/by-nc-nd/3.0/es/ |
dc.subject | Àrees temàtiques de la UPC::Enginyeria dels materials::Metal·lúrgia |
dc.subject | Plasticity |
dc.subject | Steel |
dc.subject | Metal Injection Moulding |
dc.subject | TWIP steels |
dc.subject | Melt Flow Index MFI |
dc.subject | Melt Volume-Flow Rate MVR |
dc.subject | Metallic loading |
dc.subject | Plasticitat |
dc.subject | Acer |
dc.title | Metal injection moulding (MIM) as an alternative fabrication process for production of TWIP steel |
dc.type | info:eu-repo/semantics/submittedVersion |
dc.type | info:eu-repo/semantics/article |
dc.description.abstract | |
dc.description.abstract |