dc.contributor
Universitat Politècnica de Catalunya. Departament d'Enginyeria Mecànica
dc.contributor
Universitat Politècnica de Catalunya. TECNOFAB - Grup de Recerca en Tecnologies de Fabricació
dc.contributor.author
Salueña Berna, Javier
dc.contributor.author
Ortiz Marzo, José Antonio
dc.contributor.author
Río Cano, Carlos
dc.contributor.author
Papasseit Borrell, Roger
dc.identifier
Salueña, X. [et al.]. Study of the generation of microburrs in the process of drilling and its subsequent elimination by deburring, of tubes cylindrical aluminium AA6065-T9. "AIP Conference proceedings", Gener 2010, vol. 1181, p. 521-530.
dc.identifier
https://hdl.handle.net/2117/6402
dc.description.abstract
Enllaç a la versió editorial: http://scitation.aip.org/dbt/dbt.jsp?KEY=APCPCS&Volume=1181&Issue=1
dc.description.abstract
Creation of microburrs drilling constitute a potencial danger because their detachment can modificate the correct operation of a mechanism. The burrs must be eliminated completely in the case of pistons brake, ensuring a high productivity and a low cost. In this work has been studied the mechanism for the creation of microburrs in thru holes drilled (phi2, 02 mm) of a aluminium alloy piston AA6065-T9 in order to various parameters such as the type of drill bit, feedrate, cutting speed and lubrication, imposing a minimum feedrate of 450 mm/min not to reduce the current production. Creation of microburrs drilling is inevitable and several deburring processes have been analyzed for their total elimination. After a few first essays, It has been determined that in order that the deburring are effective must be worked with minimal and known position burrr drillings.
dc.description.abstract
Peer Reviewed
dc.description.abstract
Postprint (author’s final draft)
dc.format
application/pdf
dc.relation
http://scitation.aip.org/dbt/dbt.jsp?KEY=APCPCS&Volume=1181&Issue=1
dc.subject
Àrees temàtiques de la UPC::Enginyeria mecànica::Processos de fabricació mecànica::Màquines i mecanismes
dc.subject
Poliment i acabat
dc.title
Study of the generation of microburrs in the process of drilling and its subsequent elimination by deburring, of tubes cylindrical aluminium AA6065-T9
