Experimental mode shape determination of a cantilevered hydrofoil under different flow conditions

dc.contributor
Universitat Politècnica de Catalunya. Departament de Mecànica de Fluids
dc.contributor
Universitat Politècnica de Catalunya. CDIF - Centre de Diagnòstic Industrial i Fluidodinàmica
dc.contributor
Universitat Politècnica de Catalunya. FLUIDS - Enginyeria de Fluids
dc.contributor.author
De la Torre Rodriguez, Oscar
dc.contributor.author
Escaler Puigoriol, Francesc Xavier
dc.contributor.author
Egusquiza Estévez, Eduard
dc.contributor.author
Farhat, Mohamed
dc.date.issued
2016-12-01
dc.identifier
de la Torre, O., Escaler, X., Egusquiza, E., Farhat, M. Experimental mode shape determination of a cantilevered hydrofoil under different flow conditions. "Journal of mechanical engineering science", 1 December 2016, vol. 230, no. 19, p. 3408-3419.
dc.identifier
0022-2542
dc.identifier
https://hdl.handle.net/2117/83371
dc.identifier
10.1177/0954406215614335
dc.description.abstract
The first three mode shapes of a cantilevered NACA0009 hydrofoil were experimentally investigated in air and under different flow conditions in a cavitation tunnel. First and second bending modes and first torsion mode were determined in resonance conditions with the hydrofoil vibrating in air, in still water, in flowing water, or with leading edge sheet cavitation. The hydrofoil was excited with embedded piezoelectric ceramic patches, and the response was measured along the surface at selected positions by means of a laser Doppler vibrometer. The modes of vibration obtained from a cross correlation analysis of the signals were compared for the different conditions, and the most significant differences were identified. In particular, it was found that the mode shape deformation and the location of the nodal lines are dependent on the fluid conditions.
dc.description.abstract
Postprint (author's final draft)
dc.format
application/pdf
dc.language
eng
dc.rights
http://creativecommons.org/licenses/by-nc-nd/3.0/es/
dc.rights
Open Access
dc.subject
Àrees temàtiques de la UPC::Enginyeria mecànica
dc.subject
Àrees temàtiques de la UPC::Enginyeria mecànica::Mecànica de fluids
dc.subject
Cavitation
dc.subject
Fluid mechanics
dc.subject
Cavitació
dc.subject
Mecànica de fluids
dc.title
Experimental mode shape determination of a cantilevered hydrofoil under different flow conditions
dc.type
Article


Fitxers en aquest element

FitxersGrandàriaFormatVisualització

No hi ha fitxers associats a aquest element.

Aquest element apareix en la col·lecció o col·leccions següent(s)

E-prints [73032]