Quartz crystal microbalance holder design for on-line sensing in liquid applications

dc.contributor
Universitat Politècnica de Catalunya. Departament d'Enginyeria Electrònica
dc.contributor
Universitat Politècnica de Catalunya. GSS - Grup Sistemes Sensors
dc.contributor.author
Amer, M.A.
dc.contributor.author
Chávez Domínguez, Juan Antonio
dc.contributor.author
García Hernández, Miguel J.
dc.contributor.author
Salazar Soler, Jorge
dc.contributor.author
Turó Peroy, Antonio
dc.date.issued
2016-05
dc.identifier
Amer, M., Chavez-Dominguez, J. A., Garcia, M., Salazar, J., Turo, A. Quartz crystal microbalance holder design for on-line sensing in liquid applications. "International Journal of Electrical, Computer, Energetic, Electronic and Communication Engineering", Maig 2016, vol. 10, núm. 5, p. 654-657.
dc.identifier
2010-376X
dc.identifier
https://hdl.handle.net/2117/90555
dc.description.abstract
In this paper, the design of a QCM sensor for liquid media measurements in vertical position is described. A rugged and low-cost proof holder has been designed, the cost of which is significantly lower than those of traditional commercial holders. The crystal is not replaceable but it can be easily cleaned. Its small volume permits to be used by dipping it in the liquid with the desired location and orientation. The developed design has been experimentally validated by measuring changes in the resonance frequency and resistance of the QCM sensor immersed vertically in different calibrated aqueous glycerol solutions. The obtained results show a great agreement with the Kanazawa theoretical expression. Consequently, the designed QCM sensor would be appropriate for sensing applications in liquids, and might take part of a future on-line multichannel low-cost QCM-based measurement system.
dc.description.abstract
Peer Reviewed
dc.description.abstract
Postprint (published version)
dc.format
4 p.
dc.format
application/pdf
dc.language
eng
dc.relation
http://waset.org/publications/10004502/quartz-crystal-microbalance-holder-design-for-on-line-sensing-in-liquid-applications
dc.relation
info:eu-repo/grantAgreement/MINECO//DPI2013-46915-C2-2-R/ES/DETECCION, CONTROL Y ACTUACION SOBRE BIOFILMS CON TRANSDUCTORES Y MATERIALES PIEZOELECTRICOS/
dc.rights
http://creativecommons.org/licenses/by-nc-nd/3.0/es/
dc.rights
Open Access
dc.subject
Àrees temàtiques de la UPC::Enginyeria electrònica::Instrumentació i mesura::Sensors i actuadors
dc.subject
Resonators
dc.subject
Holder design
dc.subject
liquid-media measurements
dc.subject
multi-channel measurements
dc.subject
QCM
dc.subject
Ressonadors
dc.title
Quartz crystal microbalance holder design for on-line sensing in liquid applications
dc.type
Article


Fitxers en aquest element

FitxersGrandàriaFormatVisualització

No hi ha fitxers associats a aquest element.

Aquest element apareix en la col·lecció o col·leccions següent(s)

E-prints [72987]