An inexpensive wireless smart camera system for IoT applications based on an ARM Cortex-M7 microcontroller

Autor/a

Tresanchez Ribes, Marcel

Pujol, A.

Pallejà Cabrè, Tomàs

Martínez, D.

Clotet Bellmunt, Eduard

Palacín Roca, Jordi

Fecha de publicación

2019

Resumen

This paper presents a new proposal of a low-cost and low-power wireless smart camera device, designed to be used as an inexpensive smart image acquisition edge node for Internet of Things (IoT). Taking the advantages of the ARM CortexM7 microcontrollers, a high-performance STM32F7 microcontroller is used as a main digital signal processor (DSP) to acquire and transfer images at full rate, keeping the core idle to do real-time image processing. In order to design a very compact, low-cost and low-power wireless image sensor node, the DSP is supported by an embedded 1.3 Mega Pixel CMOS camera sensor and a low consumption 2.4GHz Wi-Fi module. This setup allows a custom build-in image processing algorithm for specific IoT sensing applications or a simply setup as low-cost streaming Motion JPEG (MJPEG) wireless camera node. In this work, both configurations have been tested and analyzed. Results show that the device can acquire and process images simultaneously at a full rate (30 fps) and the MJPEG transmission reaches 7.23 fps with a QVGA resolution.

Tipo de documento

Artículo
Versión publicada

Lengua

Inglés

Materias y palabras clave

IoT node; Image sensor; Video streaming

Publicado por

International Association for Sharing Knowledge and Sustainability

Documentos relacionados

Reproducció del document publicat a https://doi.org/10.5383/juspn.11.02.001

Journal of Ubiquitous Systems and Pervasive Networks, 2019, vol. 11, núm. 2 p. 1-8

Derechos

(c) International Association for Sharing Knowledge and Sustainability, 2019

Este ítem aparece en la(s) siguiente(s) colección(ones)