In this work, a passive ultra-high frequency radio-frequency identification UHF-RFID tag based on a 1.25 wavelengths thin dipole antenna is presented for the first time. The length of the antenna is properly chosen in order to maximize the tag read range, while maintaining a reasonable tag size and radiation pattern. The antenna is matched to the RFID chip by means of a very simple matching network based on a shunt inductance. A tag prototype, based on the Alien Higgs-3 chip, is designed and fabricated. The overall dimensions are 400 mm × 14.6 mm, but the tag width for most of its length is delimited by the wire diameter (0.8 mm). The measured read range exhibits a maximum value of 17.5 m at the 902-928 MHz frequency band. This represents an important improvement over state-of-the-art passive UHF-RFID tags.
Anglès
Dipole antennas; Impedance matching; Radio-frequency identification (RFID)
Ministerio de Economía y Competitividad TEC2013-40600-R
Agència de Gestió d'Ajuts Universitaris i de Recerca 2014/SGR-157
Sensors (Basel, Switzerland) ; Vol. 16 No. 7 (July 2016)
open access
Aquest document està subjecte a una llicència d'ús Creative Commons. Es permet la reproducció total o parcial, la distribució, la comunicació pública de l'obra i la creació d'obres derivades, fins i tot amb finalitats comercials, sempre i quan es reconegui l'autoria de l'obra original.
https://creativecommons.org/licenses/by/3.0/