Current status of the 12 MeV UPC race-track microtron

Otros/as autores/as

Universitat Politècnica de Catalunya. Institut de Tècniques Energètiques

Universitat Politècnica de Catalunya. Departament de Teoria del Senyal i Comunicacions

Universitat Politècnica de Catalunya. Departament de Resistència de Materials i Estructures a l'Enginyeria

Universitat Politècnica de Catalunya. GREENER - Grup de recerca d'estudis energètics i de les radiacions

Universitat Politècnica de Catalunya. CMC - Control, Monitorització i Comunicacions

Universitat Politècnica de Catalunya. REMM - Recerca en Estructures i Mecànica de Materials

Fecha de publicación

2009

Resumen

A com­pact race-track mi­crotron (RTM) with the max­i­mal out­put en­er­gy 12 MeV is under con­struc­tion at the Uni­ver­si­tat Politècnica de Catalun­ya (UPC) in col­lab­o­ra­tion with the Sko­belt­syn In­sti­tute of Nu­cle­ar Physics of the Moscow State Uni­ver­si­ty, CIEMAT and a few Span­ish in­dus­tri­al com­pa­nies and med­i­cal cen­ters. The RTM end mag­nets are four-pole sys­tems with the mag­net­ic field cre­at­ed by a rare-earth per­ma­nent mag­net ma­te­ri­al. As a source of elec­trons a 3D off-ax­is elec­tron gun is used. These el­e­ments to­geth­er with a C-band ac­cel­er­at­ing struc­ture, dipole mag­nets, which allow to ex­tract the elec­tron beam with en­er­gy from 6 MeV to 12 MeV in 2 MeV step, and a fo­cus­ing quadrupole are placed in­side a vac­u­um cham­ber. We re­port on the cur­rent sta­tus of the tech­ni­cal de­sign and re­sults of tests of some of the com­po­nents.


Postprint (published version)

Tipo de documento

Conference lecture

Lengua

Inglés

Documentos relacionados

http://accelconf.web.cern.ch/AccelConf/PAC2009/papers/we6pfp112.pdf

Citación recomendada

Esta citación se ha generado automáticamente.

Derechos

http://creativecommons.org/licenses/by-nc-nd/3.0/es/

Open Access

Attribution-NonCommercial-NoDerivs 3.0 Spain

Este ítem aparece en la(s) siguiente(s) colección(ones)

E-prints [72986]