dc.contributor
Universitat Politècnica de Catalunya. Departament d'Enginyeria de Sistemes, Automàtica i Informàtica Industrial
dc.contributor
Universitat Politècnica de Catalunya. Departament de Màquines i Motors Tèrmics
dc.contributor
Universitat Politècnica de Catalunya. SAC - Sistemes Avançats de Control
dc.contributor.author
Gómez Pomar, Juan Carlos
dc.contributor.author
Dombrovski, Johanna Katharina
dc.contributor.author
Serra, Maria
dc.contributor.author
Husar, Attila Peter
dc.identifier
Gomez, J. [et al.]. PEM automotive stack model with experimental validation. A: Iberian Symposium on Hydrogen Fuel Cells and Advanced Batteries. "HYCELTEC 2019 - 7th Iberian Symposium on Hydrogen, Fuel Cells and Advanced Batteries". 2019, p. 238-241.
dc.identifier
https://hdl.handle.net/2117/178153
dc.description.abstract
Dynamic models of PEM stacks are the basis to design controllers for appropriate performance, maximum efficiency and minimum degradation. Fluid dynamic models of different dimensions can be found in the literature; however, these models are rarely used to improve the control laws and strategies. This work presents a control oriented 1+1D model (distributed in the direction of the stack flow channels). The model is based on a similar model presented by M. Mangold [1], is implemented in MATLAB Simulink. The model is validated using experimental data of a Powercell stack.
dc.description.abstract
Peer Reviewed
dc.description.abstract
Postprint (author's final draft)
dc.format
application/pdf
dc.relation
http://www.ub.edu/hyceltec2019/
dc.relation
info:eu-repo/grantAgreement/MINECO//DPI2015-69286-C3-2-R/ES/ESTIMACION, DIAGNOSIS Y CONTROL PARA LA MEJORA DE LA EFICIENCIA Y LA VIDA UTIL DE LAS PILAS DE COMBUSTIBLE DE TIPO PEM/
dc.relation
info:eu-repo/grantAgreement/MINECO/2PE/MDM-2016-0656
dc.relation
info:eu-repo/grantAgreement/EC/H2020/735969/EU/INNovative Cost Improvements for BALANCE of Plant Components of Automotive PEMFC Systems/INN-BALANCE
dc.rights
http://creativecommons.org/licenses/by-nc-nd/3.0/es/
dc.rights
Attribution-NonCommercial-NoDerivs 3.0 Spain
dc.subject
Àrees temàtiques de la UPC::Informàtica::Automàtica i control
dc.subject
Automobile industry and trade
dc.subject
Dynamic modeling
dc.subject
Automotive power system
dc.subject
Experimental validation
dc.subject
Galvanostatic operation
dc.subject
Piles de combustible
dc.subject
Automòbils -- Indústria i comerç
dc.title
PEM automotive stack model with experimental validation
dc.type
Conference report
