Universitat Politècnica de Catalunya
Universitat Politècnica de Catalunya. Departament de Teoria del Senyal i Comunicacions
Universitat Politècnica de Catalunya. CSC - Components and Systems for Communications Research Group
2019
This paper performs a comprehensive nonlinear modeling of a Bulk Acoustic Wave (BAW) duplexer operating at the band 7 of the LTE wireless communication standard. The modeling starts by an accurate characterization of the resonators forming the filters by performing measurements of the second harmonic (H2). The modeling of individual resonators has then been used to predict second order nonlinear manifestations occurring in a real duplexer. These are H2, second order intermodulation products (IMD2), for the case where a jamming signal is set to low frequencies (IMD2-Low) and when the jamming signal is set to high frequencies (IMD2-High). Predicted results are then validated with real measurements.
The authors would like to thank Qorvo Inc. for providing the on-wafer measurements that appear in this article. Work supported in part through grants TEC2017-84817-C2-2-R, TEC2017-88343-C4-2-R and 2017 SGR 813
Peer Reviewed
Postprint (published version)
Conference lecture
Anglès
Àrees temàtiques de la UPC::Enginyeria de la telecomunicació; Power amplifiers; Microwaves; Resonators; Resonator filters; Mathematical model; Receivers; Integrated circuit modeling; Power harmonic filters; Microwave filters; Amplificadors de potència; Microones
Institute of Electrical and Electronics Engineers (IEEE)
https://ieeexplore.ieee.org/abstract/document/8701070
info:eu-repo/grantAgreement/AEI/Plan Estatal de Investigación Científica y Técnica y de Innovación 2013-2016/TEC2017-84817-C2-2-R/ES/SENSORES GRAVIMETRICOS DE GASES BASADOS EN RESONADORES ELECTRO-ACUSTICOS DE ALN PARA APLICACIONES EN TEMPERATURAS EXTREMAS/
info:eu-repo/grantAgreement/MINECO/FEDER/TEC2017-88343-C4-2-R
info:eu-repo/grantAgreement/AGAUR/2017SGR813
Restricted access - publisher's policy
E-prints [73026]
