EMI performance comparison of two-level and three-level inverters in small dc-link capacitors based motor drives

Altres autors/es

Universitat Politècnica de Catalunya. Departament d'Enginyeria Electrònica

Universitat Politècnica de Catalunya. GREP - Grup de Recerca en Electrònica de Potència

Data de publicació

2012

Resum

The size of passive components in an adjustable speed drive can be reduced by using small dc-link capacitors. The EMI filter in the drive also consists of passive components. The size of the filter can be reduced by using a three-level inverter, which can have low output voltage distortion. However, the three-level inverter based on small dc-link capacitors requires a PWM strategy to maintain neutral-point voltage balance. In this paper, the common mode voltage, which is the determining factor for the EMI filter size, is analyzed for a virtual-vector-based PWM strategy. The common mode voltage, the shaft voltage, and the conducted emission for the small dc-link capacitor based three-level inverter are compared with that of the two-level inverter operated with space vector PWM strategy. Experimental results for the common mode voltage, the shaft voltage, and the conducted emission are presented. Results show that the conducted emission from the three-level inverter is lower than that of the two-level inverter. Thus, a three-level inverter requires a smaller EMI filter in motor drives with small dc-link capacitors.


Postprint (published version)

Tipus de document

Conference report

Llengua

Anglès

Citació recomanada

Aquesta citació s'ha generat automàticament.

Drets

http://creativecommons.org/licenses/by-nc-nd/3.0/es/

Restricted access - publisher's policy

Attribution-NonCommercial-NoDerivs 3.0 Spain

Aquest element apareix en la col·lecció o col·leccions següent(s)

E-prints [72986]