Universitat Politècnica de Catalunya. Departament de Mecànica de Fluids
Universitat Politècnica de Catalunya. CDIF - Centre de Diagnòstic Industrial i Fluidodinàmica
2022-01
Understanding and simulating the dynamic characteristics of the hydro-turbine governor system is essential to guarantee the safety of the hydro-power systems. This study proposes a modification method of the water head at the draft tube inlet, which is to discretize the draft tube and introduce the excitation term of the vortex rope. The proposed approach is applied for the modeling of the hydro-turbine governor system. The proposed model (Model I) is verified by means of a comparison with a second model (Model II) of the hydro-turbine governor system model without considering the vortex rope and verified against the experimental data during the load reduction. The model developed is accurate providing errors of the water head, inlet water head and flow of the hydro-turbine for Model ¿ are within ±3.3%, ±2% and ±5%, respectively. The proposed model overcomes the limitations of Model ¿ in the time-domain and frequency-domain since that only provides the average pressure at the draft tube, which do not reflect the pressure fluctuation and energy fluctuation. Instead the proposed model allows to capture and model the energy fluctuation during the load reduction as shown in the experimental results. The proposed model promotes the development of the hydro-turbine governor system model.
Peer Reviewed
Postprint (author's final draft)
Article
Anglès
Àrees temàtiques de la UPC::Enginyeria mecànica::Motors::Turbines; Àrees temàtiques de la UPC::Enginyeria mecànica::Mecànica de fluids; Hydraulic turbines; Vortex rope; Hydro-turbine governor system; Modeling method; Francis turbine; Dynamic characteristics analysis; Turbines hidràuliques
https://www.sciencedirect.com/science/article/abs/pii/S0960148121015329?via%3Dihub
http://creativecommons.org/licenses/by-nc-nd/4.0/
Open Access
Attribution-NonCommercial-NoDerivatives 4.0 International
E-prints [73034]