Production and characterization of oxides formed on grade 300 and 350 maraging steels using two oxygen/steam rich atmospheres

Abstract

The growing process of a spinel-like oxide film can be obtained through different atmospheres; in this sense Air, O2, steam, and nitrogen atmospheres were used in different steps during the aging heat treatment at 490ºC of maraging 300 and 350 alloys. The oxidation layer produced under different atmospheres was chemically, microstructurally and mechanically characterized by means of advanced techniques. The results showed (in both alloys) a non-homogeneous mix oxide formed by magnetite, nickel and cobalt ferrites and MoO3 heterogeneously distributed along the oxide thickness. It was also founded TiO2 in the innermost areas and a particularly important quantify of hematite on the external surface. A nickel-rich austenite phase was produced at the interphase due to the combination of nickel stability and the preference of cobalt, molybdenum, and iron diffuses through the film as ions. The highest thickness values were found in the oxides produced in maraging 300 steels which could indicate greater susceptibility to oxidation comparing with grade 350 maraging steel. The oxide films produced in both maraging alloys using air atmosphere presents excellent adherence, and the results show the capability for being used for tribological applications under sliding contact tests.

Peer Reviewed

Postprint (published version)