2013-10-25T07:39:44Z
2013-10-25T07:39:44Z
2008
2013-10-25T07:39:46Z
In this work, we investigate heterojunction emitters deposited by Hot-Wire CVD on p-type crystalline silicon. The emitter structure consists of an n-doped film (20 nm) combined with a thin intrinsic hydrogenated amorphous silicon buffer layer (5 nm). The microstructure of these films has been studied by spectroscopic ellipsometry in the UV-visible range. These measurements reveal that the microstructure of the n-doped film is strongly influenced by the amorphous silicon buffer. The Quasy-Steady-State Photoconductance (QSS-PC) technique allows us to estimate implicit open-circuit voltages near 700 mV for heterojunction emitters on p-type (0.8 Ω·cm) FZ silicon wafers. Finally, 1 cm 2 heterojunction solar cells with 15.4% conversion efficiencies (total area) have been fabricated on flat p-type (14 Ω·cm) CZ silicon wafers with aluminum back-surface-field contact.
Article
Accepted version
English
Deposició química en fase vapor; Cèl·lules solars; Teoria quàntica; Microelectrònica; Chemical vapor deposition; Solar cells; Quantum theory; Microelectronics
Elsevier B.V.
Versió postprint del document publicat a: http://dx.doi.org/10.1016/j.tsf.2007.06.192
Thin Solid Films, 2008, vol. 516, num. 5, p. 761-764
http://dx.doi.org/10.1016/j.tsf.2007.06.192
(c) Elsevier B.V., 2008