2013-10-25T08:08:51Z
2013-10-25T08:08:51Z
2000
2013-10-25T08:08:51Z
Undoped hydrogenated microcrystalline silicon was obtained by hot-wire chemical vapour deposition at different silane-to-hydrogen ratios and low temperature (<300 °C). As well as technological aspects of the deposition process, we report structural, optical and electrical characterizations of the samples that were used as the active layer for preliminary p-i-n solar cells. Raman spectroscopy indicates that changing the hydrogen dilution can vary the crystalline fraction. From electrical measurements an unwanted n-type character is deduced for this undoped material. This effect could be due to a contaminant, probably oxygen, which is also observed in capacitance-voltage measurements on Schottky structures. The negative effect of contaminants on the device was dramatic and a compensated p-i-n structure was also deposited to enhance the cell performance.
Article
Accepted version
English
Silici; Nanocristalls; Deposició química en fase vapor; Cèl·lules solars; Silicon; Nanocrystals; Chemical vapor deposition; Solar cells
Elsevier B.V.
Versió postprint del document publicat a: http://dx.doi.org/10.1016/S0927-0248(00)00030-1
Solar Energy Materials and Solar Cells, 2000, vol. 63, num. 3, p. 237-246
http://dx.doi.org/10.1016/S0927-0248(00)00030-1
(c) Elsevier B.V., 2000