Experimental Study of Mechanical Behavior of Dry-Stone Structure Contact

Abstract

Dry-stone structures are traditional constructions that are present everywhere around the world, with their stability working mostly by gravity. Contrarily to their in-plane behavior, their out-of-plane response is very brittle and is fully controlled by the geometry, as well as the contact properties, between units (stones). Two main local failure modes of dry-joint contact are identified to lead to the global failure of the structure: (i) sliding and (ii) joint opening. Most of the existing studies investigated full structures to obtain the global response and/or couplet only, with the aim of only characterizing the contact. The present experimental work studies the effect of sliding and joint opening between stones at different scales: couplets, structures made of a few (up to five) blocks, and full walls, as well as varying the way the masonry units are assembled within a single structure. Different stones are employed to quantify potential differences. All the structures are loaded up to the collapse with a tilting table to induce out-of-plane actions. Repeatability tests are also conducted to better understand the effect of contact variability. This study unveils that the heterogeneity of the dry-joint contact, as well as the repartition of the blocks, affects the global response (both in terms of load capacity and failure mode). It also confirms that the most critical local failure mode is produced by the joint opening

This research was funded by the PECT Girona Patrimoni Actiu program [grant number 001-P-000916], and the APC was funded by the University of Girona (UdG)