Obtención de vidrio a partir de residuos de la minería del estaño en Bolivia

Fecha de publicación

2013-11-20T15:42:59Z

2013-11-20T15:42:59Z

2013-07-12

2013-11-20T15:42:59Z

Resumen

Manufacturing of glass from tin mining tailings in Bolivia Tailings from mining activities in Bolivia represent an environmental problem. In the vicinity of the tin mines of Llallagua,Potosí department, there are large dumps and tailings. We present a study of the use of these wastes as raw materials for the manufacture of glass. This procedure aims to contribute to environmental remediation of mining areas through the vitrification, a process which offers an alternative for stabilization of hazardous waste. In addition, the marketing of the obtained product would provide an additional income to the mining areas. For this study three samples of mining waste, with grain size between sand and silt, were used. The chemical composition of these raw materials, determined by X-ray fluorescence, is granitic, with high contents of heavy metals. On the basis of its composition, glass were made from silica glass by adding CaCO3 and Na2CO3. The thermal cycle has been determined from TDA. Tg values of glass range from 626º to 709 °C. Leaching tests of the obtained glasses confirm their capacity to retain heavy metals.

Tipo de documento

Artículo


Versión publicada

Lengua

Castellano

Publicado por

Consejo Superior de Investigaciones Científicas (CSIC)

Documentos relacionados

Reproducció del document publicat a: 10.3989/cyv.192013

Boletin de la Sociedad Española de Ceramica y Vidrio, 2013, vol. 52, num. 3, p. 143-150

http://dx.doi.org/10.3989/cyv.192013

Citación recomendada

Esta citación se ha generado automáticamente.

Derechos

cc-by-nc (c) Consejo Superior de Investigaciones Científicas (CSIC). Sociedad Española d, 2013

http://creativecommons.org/licenses/by-nc/3.0/es

Este ítem aparece en la(s) siguiente(s) colección(ones)